Setup
Caution!
To prevent electric shock and damage to drum module or other devices, always turn off the power of all devices
before making any connections.
Connecting Pads and Pedals
Standard configuration: Kick Pad, Kick Pedal, Snare (2-zone), Tom 1~3 (2-zone), Crash (with choke), Ride
(2-zone with choke), Hi-hat, Pedal (Hi-hat).
Crash
Ride
Hi-hat
Tom3
Tom1
Tom2
Module
Kick Pad
Snare
Kick Pedal
Pedal (Hi-hat)
Notes:
1. Use the provided cables to connect the pads to the Trigger Input jack on the rear panel of the module. Make
sure each pad is connected to its corresponding trigger input jack.
2. Refer to the Setup Guide for details on assembling the drum stand, attaching the drum pads and module.
8