Midi Settings - Medeli MZ928 Owner's Manual

MIDI Settings

1.
Press the [SETUP] button, then use the [F2]/[F3] button, the [DATA]
dial or the [CURSOR] dial to select "MIDI". Then press the [F4] or
[SAVE/ENTER] button to enter this menu.
2.
Use the [CURSOR] knob to select a parameter, then use the [DATA]
dial to change the setting.
MIDI Global:
Parameter Range
GM Mode ON, OFF
Local Ctrl ON, OFF
Tx/Rx SW ON, OFF
MIDI CH1 ~ CH16
Channel
PC Chg TX ON, OFF
PC Chg RX ON, OFF
Soft Thru OFF, ON (MIDI
MIDI OUT), ON(BT),
ON (USB),
ON(ALL)
Soft Thru OFF, ON (MIDI
USB OUT), ON(BT),
ON (MIDI+BT)
Soft Thru OFF, ON(MIDI),
BT ON(USB),
ON (MIDI+USB)
MIDI Controller:
Parameter Range
Pedal CC OFF, 01, 02, 04, 11, 16,
17, 18, 19, 20, 21, 22,
23, 24, 25, 26
Snare CC OFF, 01, 02, 04, 11, 16,
17, 18, 19, 20, 21, 22,
23, 24, 25, 26
MIDI Synchronous:
Parameter Range
Sync Mode INTERNAL,
EXTERNAL
Clock MIDI, USB
Source
Sync Out OFF, ON
Description
ON: MIDI IN will respond GM drum kit.
OFF: MIDI IN will respond local drum kit.
ON: When striking a pad, the module will
produce sound and send MIDI data to MIDI
output jack.
OFF: When striking a pad, the module will
be muted but will send MIDI data to MIDI
output jack.
Turn the MIDI IN / MIDI OUT on or off.
Set the MIDI channel for transmitting or
receiving MIDI data.
Turn the Program Change Transmit on or off.
Turn the Program Change Receive on or off.
MIDI data received from MIDI IN will be
transmit-ted thru MIDI OUT, USB, Bluetooth,
or ALL (MIDI OUT + USB + Bluetooth).
MIDI data received from USB MIDI will be
trans-mitted thru MIDI OUT, Bluetooth, or
Both (MIDI OUT + Bluetooth).
MIDI data received from Bluetooth MIDI will
be transmitted thru MIDI OUT, USB, or Both
(MIDI OUT + USB).
Description
The pedal control message. Default
setting is "04".
Striking position message of the
snare. Default setting is "16".
Description
Internal: Use the module's internal clock. External
device will sync to the module's internal clock.
External: Use the external clock. The module will
sync to the clock of the external device.
When Sync Mode is External, the clock source will
come from the MIDI jack or the USB MIDI jack.
When Sync Mode is Internal, the module will or
will not send sync message to the external device.
Setup
41