Medeli MZ928 Owner's Manual page 23

3.
Use the [CURSOR] knob to select a parameter, then use the [DATA]
dial to change the setting. You can press the [F4] button to preview
the effect.
Parameter Range
IFX Type Tempo Delay, Pan Delay, LCR Delay,
Chorus, Flange, Phaser, Overdrive,
Distortion, Enhance, Auto Wah, Tempo
Wah, Pitch Change, Lo-Fi
4.
In the Kit IFX menu, press the [F3] button to enter the Trigger IFX
menu to adjust the IFX level of each pad and cymbal. Refer to similar
operations on adjusting the parameters in the Mixer chapter.
Kit IFX parameters description:
Tempo Delay:
Parameter Range
Level 0 ~ 127
Delay 1/64T, 1/64., 1/32, 1/32T, 1/32.,
Time 1/16, 1/16T, 1/16., 1/8, 1/8_T,
1/8., 1/4, 1/4_T, 1/4., 1/2, 1/2T,
1/2., 1/4*4, 1/4*5, 1/4*6, 1/4*7,
1/4*8, 1/4*9, 1/4*10, 1/4*11,
1/4*12, 1/4*13, 1/4*14, 1/4*15,
1/4*16
Feedback -63 ~ +63
Low Gain -12 ~ +12dB
High Gain -12 ~ +12dB
Pan Delay:
Parameter Range
Level 0 ~ 127
Left Delay 0.1ms ~ 1.45s
Right Delay 0.1ms ~ 1.45s
Feedback -63 ~ +63
Low Gain -12 ~ +12dB
High Gain -12 ~ +12dB
LCR Delay:
Parameter Range
Level 0 ~ 127
Left Delay 0.1ms ~ 1.45s
Right Delay 0.1ms ~ 1.45s
Center Delay 0.1 ~ 1.45s
Main Delay 0.1 ~ 1.45s
Feedback -63 ~ +63
Low Gain -12 ~ +12dB
High Gain -12 ~ +12dB
Chorus:
Parameter Range
Level 0 ~ 127
LFO Freq 0.1 ~ 12Hz
LFO Depth 0 ~ 127
Feedback -63 ~ +63
Phase Diff -180 ~ +180
Description
Select an IFX.
There are 13 IFX.
Description
Adjust the effect level.
Adjust the delay time.
Adjust the feedback level.
Adjust the low gain.
Adjust the high gain.
Description
Adjust the effect level.
Adjust the delay of the left channel.
Adjust the delay of the right channel.
Adjust the feedback level.
Adjust the low gain.
Adjust the high gain.
Description
Adjust the effect level.
Adjust the delay of the left channel.
Adjust the delay of the right channel.
Adjust the center delay.
Adjust the main delay.
Adjust the feedback level.
Adjust the low gain.
Adjust the high gain.
Description
Adjust the effect level.
Adjust the LFO frequency.
Adjust the LFO depth.
Adjust the feedback level.
Adjust the phase difference.
Effect
23