Usb Audio; Factory Reset - Medeli MZ928 Owner's Manual

2.
Use the [DATA] dial or the [CURSOR] dial to select a kit to be copied
(From Kit). It can be a preset kit or user kit.
3.
Use the [CURSOR] dial to move the cursor down (To User), then use
the [DATA] dial to select a target user kit.
4.
Press the [F4] or [SAVE/ENTER] button to complete the copy process.
Notes:
If the target user kit has data, the LCD will pop a warning message
before overwriting the data.
Kit Exchange:
This function applies to user kits only.
1.
Press the [F3] button to enter the Exchange menu.
2.
Use the [DATA] dial or the [CURSOR] dial to select a user kit (User Kit A).
3.
Use the [CURSOR] dial to move the cursor down (User Kit B), then
use the [DATA] dial to select a user kit.
4.
Press the [F4] or [SAVE/ENTER] button to exchange these two kits.

USB Audio

1.
Press the [SETUP] button, then use the [F2]/[F3] button, the [DATA]
dial or the [CURSOR] dial to select "USB Audio". Then press the [F4]
or [SAVE/ENTER] button to enter this menu.
2.
Use the [CURSOR] dial to select a parameter to edit. Then use the
[DATA] dial to change the setting.
Parameter Range
Input Gain -36dB ~ +6dB
Output Gain -36dB ~ +6dB
3.
Connect the USB audio jack of the module to computer, listen with
headphones while adjusting the parameters until you set an appropri-
ate volume level.

Factory Reset

In the Factory Reset menu, you can select to reset user drum kits, user
sounds, trigger setting separately, or reset all these data.
1.
Press the [SETUP] button, then use the [F2]/[F3] button, the [DATA]
dial or the [CURSOR] dial to select "Factory Reset". Then press the
[F4] or [SAVE/ENTER] button to enter this menu.
2.
Use the [CURSOR] dial or the [DATA] dial to select an item.
3.
Press the [F4] or the [SAVE ENTER] button to execute factory reset.
Parameter Description
Kits Reset user drum kits.
User Sounds Delete user sounds.
Trigger Reset the trigger parameters.
All Reset to factory settings. All user data and settings
will be deleted.
Option
In the Option menu, you can adjust some global parameters, Bluetooth
parameters, and settings of the EXT1 ~ 2 jacks.
Description
Adjust the gain of the input signal.
Adjust the gain of the output signal.
Setup
39