Kit Compressor; Click - Medeli MZ928 Owner's Manual

Effect

Kit Compressor

The kit compressor helps increase the loudness of the sound and make it less
likely to distort.
1.
Press the [EFFECT] button, then use the [F2]/[F3] button, the [DATA] dial or the
[CURSOR] knob to select KIT COMP. Then press the [F4] or [SAVE/ENTER]
button to enter this menu.
2.
In the Kit Comp menu, press the [F2] button to turn this effect on or off.
3.
Use the [CURSOR] dial to select a parameter, then use the [DATA] dial to
change the setting. You can press the [F4] button to preview the effect.
Parameter Range
PreGain 0 ~ 512
Threshold -64 ~ 0dB
Ratio 1:1 ~ 20:1
Attack 1 ~ 400ms
Release 5 ~ 680ms

Click

The click helps you practice at a steady tempo. You can set the click parameters
and adjust the tempo.
Press the [CLICK] button to enter the Click menu. Functions of the [F1] ~ [F4]
buttons in the menu:
Buttons Function Description
F1 Click ON/OFF Turn the click on or off.
F2 Setup Adjust the click parameters.
F3 Sound Enter the Click Sound menu to set the click sound
parameters.
F4 Tap Enter the Tap menu to set the tap parameters.
1.
You can turn on the click in two ways:
a) Press the [CLICK] button to turn on the click. This operation applies only
when Click Button is set to ON.
b) Press the [CLICK] button to enter the Click menu, then press the [F1] button
to turn on the click.
26
Description
Set the pre-gain.
Set the signal level at which the com-
pressor starts applying.
Set the compressor ratio.
Set the attack time.
The release time before the compres-
sor completely stops.
CLICK