Table of Contents
Advertisement
Detailed common trigger settings of each pad:
Pad Name
Trigger Parameters
KICK
Sensitivity, Threshold, Curve
SNARE
HeadSens, RimSens, Threshold, H/R Adjust, Curve,
XStickPoint
TOM 1 ~ 4
HeadSens, RimSens, Threshold, H/R Adjust, Curve
HI-HAT
HeadSens, RimSens, Threshold, Curve
CRASH 1 ~ 2
HeadSens, RimSens, Threshold, Curve
RIDE
HeadSens, RimSens, BellSens, Threshold, Curve
EXT1 ~ 2
Type, HeadSens, RimSens, Threshold, H/R Adjust, Curve
Curve description:
Pad Name
Trigger Parameters
LINEAR
The relation between the striking force and the sound
volume is linear.
EXP1, EXP2
Soft strikes produce small volume change. Strong
strikes produce big volume change.
LOG1, LOG2
Soft strikes produce big volume change. Strong strikes
produce small volume change.
LOUD1, LOUD2
Even soft strikes will produce large sound. It's easy to
maintain strong volume levels but has small dynamics.
SPLIN1, SPLIN2
Soft and strong strikes produce big volume change.
Medium velocity produces small volume change.
VOL
VOL
LINEAR
EXP1
Playing
Playing
Dynamics
Dynamics
VOL
VOL
LOUD1
LOUD2
Playing
Playing
Dynamics
Dynamics
Special Trigger Settings
1.
Press the [TRIGGER] button, then press the [F2] button to enter the
Special Trigger menu.
2.
Use the [CURSOR] dial to select a parameter, then use the [DATA] dial
to change the setting.
Parameter
Range
XTalk Cancel
0 ~ 100
VOL
VOL
EXP2
Playing
Dynamics
VOL
VOL
SPLIN1
Playing
Dynamics
This setting is to prevent "crosstalk". Crosstalk means when you strike a pad, the adjacent
pad also produce sound. For example, when you strike the snare pad, both the snare and
tom1 produce sound. In such a case, you can increase the crosstalk value of tom1.
Note: If the value is set too high, when the pads are played at the same time, the pad being
softly struck may not produce sound, as it may be mistakenly judged as crosstalk.
VOL
LOG1
LOG2
Playing
Playing
Dynamics
Dynamics
SPLIN 2
Playing
Dynamics
Trigger Settings
29
Advertisement
Table of Contents
