Finish - Spectra Logic T-Series Spectra T120 Supplementary Manual

Finish

1. Turn on the AC power switch on the back of the library.
2. Turn on the library using the soft power switch on the front of the library.
3. Wait for the library to come ready.
4. Go to the front of the library and log in to the LC.
The Messages screen may indicate that you need to upgrade firmware.
5. See the library's user guide for detailed instructions on firmware upgrades.
6. Once the firmware upgrade is complete, use your backup software to restart backups.
This completes the QIP upgrade procedure.
7. Proceed to Returning the G2/G3 QIP on page 12.
G4/G5 QIP Upgrade and Encrypted Media Guide
11