Finish - Spectra Logic Spectra 64K Installation Manual

Library stability kit

Hide thumbs Also See for Spectra 64K:

Table of Contents

Spectra 64K Library Stability Kit Installation Procedure

Finish

1. If you removed the side panels, snap them into place and replace the four screws

on the top of the library.

2. If you removed the hood, snap it into place.

3. Replace the front kick plate.

4. Replace the rear kick plate.

5. Connect cabling.

6. Connect the AC power cable.

7. Power up the library.

8. Enable backup software.

If You Have Difficulty

If you need assistance, call Spectra Logic Technical Support at (800) 227-4637 or

(303) 449-0160. Inform the Technical Support representative that you are adding a

stability kit to a Spectra 64K library.

Table of Contents

Do you have a question about the Spectra 64K and is the answer not in the manual?