Finish - Spectra Logic Spectra RXT Media Troubleshooting Manual

Spectra logic spectra rxt media: supplementary guide

Hide thumbs Also See for Spectra RXT Media:

Table of Contents

Finish

1. Load the RXT media pack into the RXT150.

2. Select Maintenance > Tools > Get RXT Media Pack Drive Status. The RXT media

drives should report as Optimal (green), as shown in Figure 3-23.

Figure 3-23

The Get RXT Media Pack Drive Status Utility screen.

The RXT media pack automatically rebuilds itself when placed back into the

RXT150. Note that the rebuild process can be lengthy, depending on the amount

of data. During the rebuild, read/write operations will be slower than normal.

Note: A RAID 0 RXT media pack requires reformatting; see below.

Reformatting a Disk Pack

Caution: Reformatting the RXT media pack destroys any user data that

currently exists on disks in the RXT media pack.

1. Select Maintenance > Tools; the RXT Utilities screen appears.

2. Select Reformat RXT Media Pack, then select Run; the Reformat RXT Media Pack

Utility screen appears.

3. Select Next; the reformatting process may take several minutes to complete.

4. Select Finished; the RXT Utilities screen reappears.

Chapter 3. Troubleshooting RXT Media

All drives should

appear green

(unless spare).

Table of Contents

Do you have a question about the Spectra RXT Media and is the answer not in the manual?

Rxt150