Side Stand And Main Stand; Rear Brake Pedal - VOGE DS900X Operation Manual

Side stand and main stand

The design for this model includes both side
stand and main stand.
Kill switch on side stand is a design for safety,
which is a part in starting circuit of engine.

Rear brake pedal

Step down rear brake pedal, the rear wheel
brakes, while its indicating light gets
on.Meanwhile can finish the cruise control.
1.Please park the motorcycle on solid and flat ground,
otherwise the parking is not stable.
2 In case the motorcycle need be parked on slope, make its
head forward to uphill while getting engine into 1st gear
position.to avoid turnover due to turning of side stand.
3.The design of side stand takes more consideration for the
weight of motorcycle itself, so don't take your body on
motorcycle when adopting the side stand to avoid distortion
due to overweight.
!
Warning
Kill switch on
side stand
Side stand
1.When the side stand working, it just supports the
motorcycle, the engine could be started only when
it is in neutral gear; When engine is not in neutral
gear, any gear positions the engine could not be
started.
2.When side stand completely picked up, tightly
hold clutch lever, the engine could be started at any
gear position; When the engine is in gear position,
once lay down the side stand, then engine stops
immediately.
Rear brake
pedal
!
Caution
48