Brake Pads - VOGE 500DS User Manual

Brake pads

When the abrasion passed the minimum limit may decrease the braking effect Under some cases it
may damage the brake system For the reliability of brake system the pads abrasion over minimum
limit is not allowed .
Replace the brake pads
The correct way for replacing the brake
pads needs remove the wheels so we
suggest contact the VOGE authorized
distributor for this work
· Both the front and rear brake pads need be
replaced as a set in case replace only one ,
piece it may lead to imbalanced braking ,
which makes accident Operate the brake
lever or pedal when the brake pads
removed is not allowed or it may make the difficult returning of brake piston also the risk of brake
fluid leakage .
· The oil or other dirt touches brake pads
and plate when replacing is not allowed
in case it is clean up is necessary or it ,
may make skidding brake and decrease
the braking effect
62
.
,
.
.
,
,
,
.
Abrasion limit position
for front brake pads:
After the brake pads replaced repeatedly confirm by
brake lever and pedal for making sure the brake pads
tightly pressed the brake plate
Meanwhile confirm the correct free travel of brake lever
and pedal .
.
,
Limit abrasion position for
rear brake pads ：
,
!
Danger
,
.
,