Brake Pads - VOGE SR4 Max LX350T-5A Book

In case the fuse chip usually burns out in short time, which indicates there is malfunction in
electrical system, please contact the VOGE dealer immediately.
·Please use the fuse chip with given specification, substitution such as aluminum sheet or
iron wire are not allowed.
·Connect the fuse chip out of our suggestion is not allowed, other wise it is ver y bad for
circuit even catch fire or burn out the motorcycle.

Brake pads

The abrasion of brake pad passed the min. thickness limit may lead to poor braking performance,
under some cases, it may lead to brake system damage. For the reliability for braking, the abrasion
passed Min. thickness limit is not allowed.
Replacement for brake pad
The correct replacement needs to remove the wheels, so this work shall be done by VOGE dealer.
·No matter the front or rear brake pads, replace them in pairs as a set, in case only replace one piece of
them, it may make imbalance brake even accident.
·After the brake pads removed, don't operate the brake lever, other wise the brake piston may return
hardly, meanwhile making leakage of brake liquid.
·The oil or other dirt touches brake pad and plate when replacing is not allowed, in case if there is,
please clean it up, other wise it may make poor braking performance.
!
Danger
65