Bender ISOMETER isoES425 Manual page 14

Insulation monitoring device for unearthed ac-, ac/dc and dc systems for energy storage devices up to ac/dc 400v

Hide thumbs Also See for ISOMETER isoES425:

Table of Contents

Function

With "Adr = 0", the menu entries baud rate and parity are not shown in the menu and the IsoData protocol

is activated.

With a valid bus address (i.e. not equal to 0), the menu item "baud rate" is displayed in the menu. The

parameter value "---" for the baud rate indicates the activated BMS protocol. In this case, the baud rate

for the BMS protocol is set to 9600 baud. If the baud rate is set unequal to "---", the Modbus protocol with

configurable baud rate is activated.

isoES425_D00214_01_M_XXEN/10.2023

Table of Contents

Need help?

Do you have a question about the ISOMETER isoES425 and is the answer not in the manual?