Connection; Standards And Certifications - Bender ISOMETER isoES425 Manual

Technical data
DIN rail mounting acc. to
Screw mounting
Weight
6.2

Connection

Push-wire terminals
Nominal current
Conductor sizes
Stripping length
Rigid
Flexible without ferrules
Flexible with ferrules with/without plastic sleeve
Multi-conductor flexible with TWIN ferrules with plastic sleeve
Opening force
Test opening
6.3

Standards and certifications

The ISOMETER® was developed in compliance with the standards specified in the Declaration of Conformity.
EU Declaration of Conformity
Hereby, Bender GmbH & Co. KG declares that the device covered by the Radio Directive complies with
Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following Internet
address:
https://www.bender.de/fileadmin/content/Products/CE/CEKO_isoXX425.pdf
UKCA Declaration of Conformity
Hereby, Bender GmbH & Co. KG declares that this device is in compliance with Radio Equipment Regulations
2017 (S.I. 2017/1206). The full text of the UK declaration of conformity is available at the following internet
address:
https://www.bender.de/fileadmin/content/Products/UKCA/UKCA_isoXX425.pdf
32 isoES425_D00214_01_M_XXEN/10.2023
IEC 60715
2 × M4 with mounting clip
≤ 150 g
≤ 10 A
AWG 24...14
10 mm
0.2...2.5 mm
0.75...2.5 mm
0.25...2.5 mm
0.5...1.5 mm
50 N
Ø 2.1 mm
2
2
2
2