Buttercups Removal - Damper Shaft - SRAM RockShox ZEB Ultimate Flight Attendant Service Manual

2 0 0 H o u r S e r v i c e
1
Clamp the lower ButterCups housing into a vise with Reverb Vise Clamp the lower ButterCups housing into a vise with Reverb Vise
Blocks or RockShox Rear Shock Vise Blocks on the wrench flats, with Blocks or RockShox Rear Shock Vise Blocks on the wrench flats, with
the damper oriented downward. the damper oriented downward.
Hold the damper shaft for support and unthread the upper ButterCups Hold the damper shaft for support and unthread the upper ButterCups
housing from the lower housing. housing from the lower housing.
2 Remove the damper assembly from the lower cup and set it aside. Remove the damper assembly from the lower cup and set it aside.
3 Remove the lower ButterCups bumper from the lower ButterCups Remove the lower ButterCups bumper from the lower ButterCups
housing and discard it. housing and discard it.
Remove the lower ButterCups housing from the vise. Remove the lower ButterCups housing from the vise.
Do not remove the alignment bolt. Do not remove the alignment bolt.
4 Remove the lower ButterCups housing from the vise. Clean the lower Remove the lower ButterCups housing from the vise. Clean the lower
ButterCups housing. ButterCups housing.
B u t t e r C u p s R e m o v a l - D a m p e r S h a f t
25 mm or adjustable open end wrench
Pick (non-metallic)

ButterCups Removal - Damper Shaft

44