Table of Contents
Advertisement
2 0 0 H o u r S e r v i c e
1
Apply a liberal amount of SRAM Butter grease evenly around the end
Apply a liberal amount of SRAM Butter grease evenly around the end
of a clean plastic dowel, approximately 150 mm from one end. Use
of a clean plastic dowel, approximately 150 mm from one end. Use
the dowel to apply the grease to the inside surface of the upper tube,
the dowel to apply the grease to the inside surface of the upper tube,
approximately 150 mm into the tube.
approximately 150 mm into the tube.
2
Apply grease to the air piston and seal head outer o-rings.
Apply grease to the air piston and seal head outer o-rings.
3
With the crown steerer upper tube assembly clamped in the bicycle
With the crown steerer upper tube assembly clamped in the bicycle
work stand, orient the upper tubes upward and the steerer tube
work stand, orient the upper tubes upward and the steerer tube
oriented downward.
oriented downward.
Insert the air spring assembly into the upper tube. Firmly push the air
Insert the air spring assembly into the upper tube. Firmly push the air
piston into the upper tube.
piston into the upper tube.
Inject 1 mL of Maxima PLUSH Dynamic Suspension Lube Heavy
Inject 1 mL of Maxima PLUSH Dynamic Suspension Lube Heavy
upper tube, on top of the air piston and into the negative air chamber.
upper tube, on top of the air piston and into the negative air chamber.
A i r S p r i n g I n s t a l l a t i o n
into the
into the
Dowel and grease
150 mm
SRAM Butter Grease
Maxima PLUSH Dynamic
1 mL
Suspension Lube Heavy
36
Air Spring Installation
Advertisement
Table of Contents
