SRAM RockShox ZEB Ultimate Flight Attendant Service Manual page 48

9 Clamp the cartridge tube, on the bladder coupler wrench flats, back Clamp the cartridge tube, on the bladder coupler wrench flats, back
into the vise. into the vise.
Spray RockShox Suspension Cleaner or isopropyl alcohol into the Spray RockShox Suspension Cleaner or isopropyl alcohol into the
cartridge tube. cartridge tube.
Squeeze the bladder 5-6 times to circulate the cleaner into the damper. Squeeze the bladder 5-6 times to circulate the cleaner into the damper.
10 Remove the tube from the vise. Orient the tube downward and Remove the tube from the vise. Orient the tube downward and
squeeze the bladder until the cleaner and any remaining oil is drained squeeze the bladder until the cleaner and any remaining oil is drained
into an oil pan. into an oil pan.
Place the tube on a shop towel for a few minutes to allow any excess Place the tube on a shop towel for a few minutes to allow any excess
cleaner to drain. cleaner to drain.
11 Dry the cartridge tube and compression damper assembly with Dry the cartridge tube and compression damper assembly with
compressed air. compressed air.
Air compressor and air gun nozzle
48
Damper Service