Caliper Brake Pad Removal - SRAM G2 RE Service Manual

C a l i p e r B r a k e P a d R e m o v a l
1 Remove the brake caliper from the fork or frame. Remove the brake caliper from the fork or frame.
Remove the caliper mounting bracket and hardware from the caliper Remove the caliper mounting bracket and hardware from the caliper
then set them aside in the order that they were removed. then set them aside in the order that they were removed.
2 Remove the E-clip from the pad retention bolt. Remove the E-clip from the pad retention bolt.
Remove the pad retention bolt from the caliper. Remove the pad retention bolt from the caliper.
3 Remove the brake pads from the caliper. Remove the brake pads from the caliper.
Brake pads must be replaced if the total thickness of the backing plate Brake pads must be replaced if the total thickness of the backing plate
and pad friction material is less than 3 mm. and pad friction material is less than 3 mm.
NOTI CE
Needle nose pliers
Digital caliper
2.5 mm

Caliper Brake Pad Removal

10