SRAM RockShox ZEB Ultimate Flight Attendant Service Manual page 65

4 Position the fork at an angle with the bolt holes oriented upward. Position the fork at an angle with the bolt holes oriented upward.
Inject Maxima PLUSH Dynamic Suspension Lube Light into each lower Inject Maxima PLUSH Dynamic Suspension Lube Light into each lower
leg through the bottom bolt holes. leg through the bottom bolt holes.
Do not exceed the recommended oil volume per leg as this can
damage the fork.
Fork Damper Side (mL)
ZEB
Lyrik
Pike
5 S S lide the lower leg assembly toward the crown until it stops.
The air spring and damper ButterCups shaft ends should be visible he air spring and damper ButterCups shaft ends should be visible
through the bottom bolt holes. through the bottom bolt holes.
Verify each ButterCups shaft end is centered and seated in the lower Verify each ButterCups shaft end is centered and seated in the lower
leg shaft/bolt hole and no gap is visible between the lower leg and leg shaft/bolt hole and no gap is visible between the lower leg and
each threaded shaft end. each threaded shaft end.
Align the ButterCups shaft ends into the bottom bolt holes if needed. Align the ButterCups shaft ends into the bottom bolt holes if needed.
NOTI CE
Spring Side (mL)
30 15
Maxima PLUSH Dynamic Suspension Lube Light
Spring side
See Table
Damper side
65
Lower Leg Installation