2 0 0 H o u r S e r v i c e
1
Clamp the lower ButterCups housing into a vise with Reverb Vise
Clamp the lower ButterCups housing into a vise with Reverb Vise
Blocks or RockShox Rear Shock Vise Blocks on the wrench flats, with
Blocks or RockShox Rear Shock Vise Blocks on the wrench flats, with
the air spring oriented upward.
the air spring oriented upward.
Hold the air spring shaft for support and unthread the upper
Hold the air spring shaft for support and unthread the upper
ButterCups housing (25 mm) from the lower ButterCups housing.
ButterCups housing (25 mm) from the lower ButterCups housing.
2
Remove the air spring assembly from the lower ButterCups housing
Remove the air spring assembly from the lower ButterCups housing
and set it aside.
and set it aside.
3
Remove the ButterCups bumper from the lower ButterCups housing
Remove the ButterCups bumper from the lower ButterCups housing
and discard it.
and discard it.
4
Remove the lower ButterCups housing from the vise. Clean the lower
Remove the lower ButterCups housing from the vise. Clean the lower
ButterCups housing.
ButterCups housing.
B u t t e r C u p s R e m o v a l - A i r S p r i n g S h a f t
25 mm or adjustable open end wrench
Pick (non-metallic)
ButterCups Removal - Air Spring Shaft
26