SRAM RockShox ZEB Ultimate Flight Attendant Service Manual page 56

5 Install the lower ButterCups housing bumper into the lower ButterCups Install the lower ButterCups housing bumper into the lower ButterCups
housing, wide side down, in alignment with the bolt. housing, wide side down, in alignment with the bolt.
6
Apply Threadlocker Loctite 242 (blue), or equivalent, to three full outer Apply Threadlocker Loctite 242 (blue), or equivalent, to three full outer
threads on the lower ButterCups housing. threads on the lower ButterCups housing.
7 Position the upper ButterCups housing and bumper above the vise Position the upper ButterCups housing and bumper above the vise
blocks. blocks.
Install the lower ButterCups housing/bumper assembly onto the Install the lower ButterCups housing/bumper assembly onto the
ButterCups shaft end plate; insert the bolt through the end plate bolt ButterCups shaft end plate; insert the bolt through the end plate bolt
hole. hole.
Slide lower cup to the upper bumper end plate, and position the Slide lower cup to the upper bumper end plate, and position the
alignment bolt through the hole on the end plate. alignment bolt through the hole on the end plate.
Thread the upper ButterCups housing onto the lower ButterCups Thread the upper ButterCups housing onto the lower ButterCups
housing finger tight. housing finger tight.
Theadlocker Loctite 242 - Blue
ButterCups Installation - Damper Shaft
56