Compression Damper Removal - SRAM RockShox Reba Series Service Manual

Use a 24 mm socket to loosen the compression damper top cap.
2
Remove the compression damper by pulling up and gently rocking
side to side. Clean the upper tube threads with a rag.
Use a pick or your fingers to remove the compression damper top
3
cap o-ring. Apply grease to the new o-ring and install it.
RLT Only: Install a new o-ring on the cam.
Do not scratch the top cap. Scratches can cause leaks.
Use a pick or your fingers to remove the compression damper
4
piston o-ring. Apply suspension fluid to the new o-ring and install
it.
Do not scratch the piston. Scratches may cause air to leak.
Remove the fork from the bicycle stand and pour the suspension
5
fluid into an oil pan.
16
24 mm
RL
RLT

COMPRESSION DAMPER REMOVAL