SRAM RockShox ZEB Ultimate Flight Attendant Service Manual page 41

3 Loosen each Flight Attendant Control Module set screw. Loosen each Flight Attendant Control Module set screw.
Do not remove the set screws. Do not remove the set screws.
4
Carefully remove the Flight Attendant Control Module from the Carefully remove the Flight Attendant Control Module from the
compression damper top cap. Use both thumbs to evenly push the compression damper top cap. Use both thumbs to evenly push the
Control Module straight up and out of the top cap. Control Module straight up and out of the top cap.
Do not damage the internal mechanism when removing the Control
Module.
5 Clean the underside of the Control Module with a damp clean shop Clean the underside of the Control Module with a damp clean shop
towel. towel.
Set the Control Module aside. Set the Control Module aside.
Do not spray any cleaners onto the Control Module.
NOTI CE
NOTI CE
2 mm
Flight Attendant Control Module Removal
2 mm
41