: Click to reset IP address to default setting.
4.2.6 DLF/Broadcast Rate Limit
Destination Lookup Failure -- The Destination Lookup Failure (DLF) setting is concerned with comparing the destination MAC
address of a packet received by the switch to the forwarding database. When the switch receives a packet, it scans the
forwarding database and looks for a match to the destination MAC address in the received packet. If the MAC address is not
present, then the packet is flooded according to the VLAN rules. By default, this setting is disabled on the switch which means
that all DLF packets are automatically forwarded according to the VLAN rules. Broadcast Setting - The broadcast setting applies
to allowing or denying broadcast packets on each port. The screen in
The Page includes the following fields:
Object
Rate Limit
Rate
Button
: Save configuration.
: Click to undo any changes made locally and revert to previously saved values.
: Click to reset IP address to default setting.
Figure 4-2-6: DLF/Broadcast Rate Limit Page Screenshot
Description
Enables or disables the rate limitation function. Default setting is disable.
Specifies the maximum rate for transmission.
Valid range: 2~10
Figure 4-2-6
appears.
- 32 -