Rate Limit; Ingress Bandwidth Control - Planet WGS-4215-T User Manual

Table of Contents

4.8.4 Rate Limit

Configure the switch port rate limit for the switch port on this page.

This page provides to select the ingress bandwidth preamble. The Ingress Bandwidth Control Setting and Status screens in

Figure 4-8-17

Figure 4-8-18

The page includes the following fields:

: Click to apply changes.

Figure 4-8-17 Ingress Bandwidth Control Settings Page Screenshot

Select port number from this drop-down list

Enable or disable the port rate policer. The default value is "Disabled".

Configure the rate for the port policer. The default value is "unlimited". Valid

values are in the range 0 to 1000000.

Figure 4-8-18 Ingress Bandwidth Control Status Page Screenshot

User's Manual of WGS Managed Series