The page includes the following fields:
Object
• Port
•
Ingress Rate Limit (Kbps)
4.8.4.2 Egress Bandwidth Control
This page provides to select the egress bandwidth preamble. The Egress Bandwidth Control Setting and Status screens in
Figure 4-8-19
&
Figure 4-8-20
The page includes the following fields:
Object
• Port
• State
•
Rate (Kbps)
Buttons
: Click to apply changes.
Description
The switch port number of the logical port
Display the current ingress rate limit
appear.
Figure 4-8-19 Egress Bandwidth Control Settings Page Screenshot
Description
Select port number from this drop-down list
Enable or disable the port rate policer. The default value is "Disabled".
Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000.
User's Manual of WGS Managed Series
215