Vlan Setting Example; Two Separate 802.1Q Vlans - Planet IGS-5225 Series User Manual

4.3.3.8 VLAN setting example:

Separate VLAN

802.1Q VLAN Trunk

Port Isolate


4.3.3.8.1 Two Separate 802.1Q VLANs

The diagram shows how the Industrial Managed Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group
2 and VLAN Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive traffic from
the same VLAN members. The screen in
Industrial Managed Switches.
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario is described as follows:
Untagged packet entering VLAN 2

Figure 4-3-3-7 appears and
Figure 4-3-3-7: Two Separate VLANs Diagram
VID Untagged Members
1 Port-7 ~ Port-52
2 Port-1,Port-2
3 Port-4,Port-5
Table 4-1: VLAN and Port Configuration
177
User's Manual of IGS-5225 series
Table 4-3-3-8 describes the port configuration of the
Tagged Members
N/A
Port-3
Port-6