Planet GS-5220 User Manual page 38

GS-5220-24UP4X Front Panel
GS-5220-24UP4XR Front Panel
GS-5220-24UPL4X Front Panel
GS-5220-24UPL4XR Front Panel
■ Gigabit TP interface
10/100/1000BASE-T Copper, RJ45 twisted-pair: Up to 100 meters
■ 10 Gigabit SFP+ slot
1/10GBASE-SR/LR mini-GBIC slot, SFP+ (Small Factor Pluggable Plus) Transceiver module supports from 300 meters
(multi-mode fiber) up to 10 kilometers (single mode fiber)
■ Console port
The console port is a RJ45 port connector. It is an interface for connecting a terminal directly. Through the console port, it
provides rich diagnostic information including IP address setting, factory reset, port management, link status and system
setting. Users can use the attached DB9 to RJ45 console cable in the package and connect to the console port on the
device. After the connection, users can run any terminal emulation program (Hyper Terminal, ProComm Plus, Telix,
Winterm and so on) to enter the startup screen of the device.
■ Reset button
The front panel of the GS-5220 PoE Series comes with a reset button designed for rebooting the Managed Switch without
turning off and on the power. The following is the summary table of reset button
User's Manual of GS-5220 PoE Series Managed Switch
Figure 2-1-11: Front Panel of GS-5220-24UP4X
Figure 2-1-12: Front Panel of GS-5220-24UP4XR
Figure 2-1-13: Front Panel of GS-5220-24UPL4X
Figure 2-1-14: Front Panel of GS-5220-24UPL4XR
38
functions: