Qcl Status - Planet GS-5220 User Manual

4.5.5.3 QCL Status

This page shows the QCL status by different QCL users. Each row describes the QCE that is defined. It is a conflict if a specific
QCE is not applied to the hardware due to hardware limitations. The maximum number of QCEs is 256 on each switch. The
QoS Control List Status screen in
The page includes the following fields:
Object
• User
•
QCE#
• Port
•
Frame Type
•
Action
•
Conflict
Figure 4-5-5-3 appears.
Figure 4-5-5-3: QoS Control List Status Page Screenshot
Description
Indicates the QCL user.
Indicates the index of QCE.
Indicates the list of ports configured with the QCE.
Indicates the type of frame to look for incoming frames. Possible frame types are:
■
Any: The QCE will match all frame types.
■
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are
allowed.
■
LLC: Only (LLC) frames are allowed.
■
SNAP: Only (SNAP) frames are allowed.
■
IPv4: The QCE will match only IPV4 frames.
■
IPv6: The QCE will match only IPV6 frames.
Indicates the classification action taken on ingress frame if parameters
configured are matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
■
Class: Classified QoS class; if a frame matches the QCE it will be
put in the queue.
■
DPL: Drop Precedence Level; if a frame matches the QCE then DP
level will set to value displayed under DPL column.
■
DSCP: If a frame matches the QCE then DSCP will be classified with
the value displayed under DSCP column.
Displays Conflict status of QCL entries. As H/W resources are shared by multiple
User's Manual of GS-5220 PoE Series Managed Switch
293