Planet GS-5220 User Manual page 48


GS-5220-24UP4XR

GS-5220-24UPL4XR
The rear panels of the above models have a power switch and a DC power connector, where the latter accepts DC power
input voltage from 36V to 60V DC. Connect the power cable to the Managed Switch at the input terminal block. The size of
the two screws in the terminal block is M3.5.
Figure 2-1-23 Rear Panel of GS-5220 PoE series Redundant Power Models
Before connecting the DC power cable to the input terminal block of the GS-5220 PoE series redundant
Warning:
power models, make sure that the power switch is in the "OFF" position and the DC power is OFF.
User's Manual of GS-5220 PoE Series Managed Switch
48