Switch Rear Panel - Planet GS-5220 User Manual

2.1.3 Switch Rear Panel

The rear panel of the Managed Switch consists of the AC/DC inlet power socket.
panels of the Managed Switches.
GS-5220-24P4X/24PL4X/48P4X/48PL4X/16UP4S2X/24UP4X/24UPL4X Rear Panel
Figure 2-1-27: Rear Panel of GS-5220-24P(L)4X/48P(L)4X/16UP4S2X/24UP(L)4X
GS-5220-24P4XR/24PL4XR/48P4XR/48PL4XR/16UP4S2XR/24UP4XR/24UPL4XR Rear Panel
Figure 2-1-28: Rear Panel of GS-5220-24P(L)4XR/48P(L)4XR/16UP4S2XR/24UP(L)4XR
■ AC Power Receptacle
For compatibility with electrical voltages in most areas of the world, the Managed Switch's power supply can automatically
adjust line power in the range of 100-240V AC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptacle on the rear panel of the Managed Switch and the other end
of the power cord into an electrical outlet and the power will be ready.
The device is a power-required device, which means it will not work till it is powered. If your networks
should be active all the time, please consider using UPS (Uninterrupted Power Supply) for your device.
Power Notice:
It will prevent you from network data loss or network downtime. In some areas, installing a surge
suppression device may also help to protect your Managed Switch from being damaged by unregulated
surge or current to the Switch or the power adapter.
■ DC Power Connector
The following GS-5220 PoE series supports redundant power system (PoE not included ):

GS-5220-24P4XR

GS-5220-24PL4XR

GS-5220-48P4XR

GS-5220-48PL4XR

GS-5220-16UP4S2XR
User's Manual of GS-5220 PoE Series Managed Switch
Figures 2-1-27 and 2-1-28
47
show the rear