Planet GS-5220 User Manual page 71

Add / Edit User
This page configures a user – add, edit or delete user.
The page includes the following fields:
Object
• Username
• Password
• Password (again)
• Privilege Level
Buttons
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the Users.
: Delete the current user. This button is not available for new configurations (Add new user).
Figure 4-2-1-5: Add / Edit User Configuration Page Screenshot
Description
A string identifying the user name that this entry should belong to. The allowed string
length is 1 to 31. The valid user name is a combination of letters, numbers and
underscores.
The password of the user. The allowed string length is 1 to 31.
Please enter the user's new password here again to confirm.
The privilege level of the user.
The allowed range is 1 to 15. If the privilege level value is 15, it can access all
groups, i.e. that is granted the fully control of the device. But others value need to
refer to each group privilege level. User's privilege should be same or greater than
the group privilege level to have the access of that group.
By default setting, most groups privilege level 5 has the read-only access and
privilege level 10 has the read-write access. And the system maintenance (software
upload, factory defaults and etc.) needs user privilege level 15.
Generally, the privilege level 15 can be used for an administrator account, privilege
level 10 for a standard user account and privilege level 5 for a guest account.
User's Manual of GS-5220 PoE Series Managed Switch
71