Planet GS-5220 User Manual page 350
L3 gigabit/10 gigabit managed poe switch
Hide thumbs
Also See for GS-5220:
- User manual (568 pages) ,
- Quick installation manual (16 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
• IP Protocol Value
• IP TTL
• IP Fragment
• IP Option
• SIP Filter
• SIP Address
• SIP Mask
• DIP Filter
User's Manual of GS-5220 PoE Series Managed Switch
this help file.
■
TCP: Select TCP to filter IPv4 TCP protocol frames. Extra fields for defining
TCP parameters will appear. These fields are explained later in this help
file.
When "Specific" is selected for the IP protocol value, you can enter a specific
value. The allowed range is 0 to 255. A frame that hits this ACE matches this IP
protocol value.
Specify the Time-to-Live settings for this ACE.
■
zero: IPv4 frames with a Time-to-Live field greater than zero must not be
able to match this entry.
■
non-zero: IPv4 frames with a Time-to-Live field greater than zero must be
able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the fragment offset settings for this ACE. This involves the settings for
the More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for
an IPv4 frame.
■
No: IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must not be able to match this entry.
■
Yes: IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the options flag setting for this ACE.
■
No: IPv4 frames where the options flag is set must not be able to match
this entry.
■
Yes: IPv4 frames where the options flag is set must be able to match this
entry.
■
Any: Any value is allowed ("don't-care").
Specify the source IP filter for this ACE.
■
Any: No source IP filter is specified. (Source IP filter is "don't-care".)
■
Host: Source IP filter is set to Host. Specify the source IP address in the
SIP Address field that appears.
■
Network: Source IP filter is set to Network. Specify the source IP address
and source IP mask in the SIP Address and SIP Mask fields that appear.
When "Host" or "Network" is selected for the source IP filter, you can enter a
specific SIP address in dotted decimal notation.
When "Network" is selected for the source IP filter, you can enter a specific SIP
mask in dotted decimal notation.
Specify the destination IP filter for this ACE.
■
Any: No destination IP filter is specified. (Destination IP filter is
"don't-care".)
350
Advertisement
Table of Contents
