4.3.3.8.2 VLAN Trunking between two 802.1Q aware switches
The most cases are used for "Uplink" to other switches. VLANs are separated at different switches, but they need to access
with other switches within the same VLAN group. The screen in
Setup steps
1.
Add two VLANs – VLAN 2 and VLAN 3
Type 1-3 in Allowed Access VLANs column, the 1-3 is including VLAN1 and 2 and 3.
2.
VLAN 2 : Port-1,Port-2 and Port-3
VLAN 3 : Port-4, Port-5 and Port-6
VLAN 1 : All other ports – Port-7~Port-28
Figure 4-3-3-12: VLAN Trunking Diagram
Add VLAN Group
Figure 4-3-3-13: Add VLAN 2 and VLAN 3
Assign VLAN Member and PVID for each port :
User's Manual of GS-5220 PoE Series Managed Switch
Figure 4-3-3-12
appears.
152