Planet GSD-1008HP Manual

8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T
Desktop Switch (120 watts)
Flexible, Extendable and Centralized Power Distribution
PLANET GSD-1008HP provides eight 10/100/1000T ports featuring 30-watt
802.3at PoE+, a total 120-watt PoE budget and extra two uplink ports to fulfill
the demand of sufficient PoE power for HD IP surveillance and Wi-Fi system
in a small-scale but high-performance network. With the same desktop-sized
and compact metal housing, it makes the placement of the unit convenient and
provides a quick and easy PoE PDs deployment with power feeding.
Ethernet Data Transmit Distance Extension
The built-in solid DIP switch provides "Standard", "VLAN" and "Extend"
operation modes. The GSD-1008HP operates as a normal IEEE 802.3at PoE+
switch in the "Standard" operation mode.
The "VLAN" operation mode features with port-based VLAN function that helps to
prevent the IP camera's multicast or broadcast storm from influencing each other.
In the "Extend" operation mode, the GSD-1008HP operates on a per-port basis at
10Mbps duplex operation but supports 30-watt PoE power output over a distance
of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this
brand-new feature, the GSD-1008HP provides an additional solution for 802.3at
PoE+ distance extension, thus saving the cost of Ethernet cable installation.
Furthermore, its VLAN isolation function isolates each port so as to prevent
broadcast storm and defend DHCP spoofing in the "Extend" operation mode.
GSD-1008HP
Physical Port
• 10-port 10/100/1000BASE-T Gigabit Ethernet RJ45 copper
• 8-port IEEE 802.3at PoE+ Injector (Port-1 to Port-8)
Power over Ethernet
• Complies with IEEE 802.3at Power+ over Ethernet end-
span PSE
• Up to 8 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 30.8 watts for each PoE port
• Each port supports 55V DC power to PoE powered device
• 120-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100m in standard mode with
250m in extended mode
Switching
• Hardware-based 10/100/1000Mbps auto-negotiation and
auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for
half duplex operation
• IEEE 802.1Q VLAN transparency
• Hardware DIP switch for Standard, VLAN and Extend
mode selection; the Extend mode features 30-watt PoE
transmit distance of 250m at speed of 10Mbps and VLAN
isolation (Only for Port-1 to Port-8)
• Solid DIP switch to isolate ports to prevent broadcast storm
and defend DHCP spoofing
Hardware
• 9-inch desktop size, 1U height, rack mountable
• LED indicators for system power, per port PoE ready and
PoE activity, speed, Link/Act
• Supports Energy-Efficient Ethernet (EEE) function (IEEE
802.3az)
1