Neighbor Status - Planet GS-5220 User Manual

Buttons
Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Click to refresh the page immediately.

4.4.4.11 Neighbor Status

This is OSPF IPv4 neighbor status table. It is used to provide the OSPF neighbor status information. The screen in
4-4-4-11 appears.
The page includes the following fields:
Object
Neighbor ID
Priority
State
Dead Time
Interface Address
Interface
Buttons
Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Click to refresh the page immediately.
Figure 4-4-4-11: Neighbor Status Page Screenshot
Description
The Neighbor ID.
The priority of OSPF neighbor. It indicates the priority of the neighbor router. This item is used when
selecting the DR for the network. The router with the highest priority becomes the DR.
The state of OSPF neighbor. It indicates the functional state of the neighbor router.
Dead timer. It indicates the amount of time remaining that the router waits to receive an OSPF hello
packet from the neighbor before declaring the neighbor down.
The IP address.
The network interface.
User's Manual of GS-5220 PoE Series Managed Switch
267
Figure