1 Package Contents Thank you for purchasing PLANET Managed PoE Switch, GS-5220-8P2T2X/GS- 5220-8UP2T2X. The descriptions of these models are shown below: GS-5220- L3 8-Port 10/100/1000T 802.3at PoE + 2-Port 8P2T2X(v2) 10/100/1000T + 2-Port 10G SFP+ Managed Switch L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port GS-5220-8UP2T2X 10/100/1000T + 2-Port 10G SFP+ Managed Switch “Managed PoE Switch” is used as an alternative name in this Quick Installation Guide. Open the box of the Managed PoE Switch and carefully unpack it. The box should...
2. Requirements z Workstations running Windows 10/XP/2003/Vista/7/8/2008, MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols. z Workstations are installed with Ethernet NIC (Network Interface Card) z Serial Port Connection (Terminal) The above Workstations come with COM Port (DB9) or USB-to-RS232 converter. The above Workstations have been installed with terminal emulator, such as Tera Term, PuTTY or Hyper Terminal included in Windows XP/2003.
3. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to RJ45 type of serial port of the Managed PoE Switch. PC / Workstation with Terminal Emulation Software Managed Switch RS232 to RJ45 Cable Serial Port RJ45 Console Port Figure 3-1: Managed PoE Switch Console Connectivity A terminal program is required to make the software connection to the Managed PoE Switch.
The factory default user name and password are shown as follows and the login screen in Figure 3-3 appears. Username: admin Password: admin The following console screen based on GS-5220-8P2T2X will be the same as that of GS-5220-8UP2T2X. Note Figure 3-3: Managed PoE Switch Console Login Screen The user can now enter commands to manage the Managed PoE Switch. For a detailed description of the commands, please refer to the following chapters.
Page 7
To check the current IP address or modify a new IP address for the Switch, please use the procedures as follows: Show the current IP Address 1. At the “#” prompt, enter “show ip interface brief”. 2. The screen displays the current IP address as shown in Figure 3-4. Figure 3-4: IP Information Screen Configuring IP Address 3. At the “#” prompt, enter the following command and press <Enter> as shown in Figure 3-5.
4. Repeat step 1 to check if the IP address has changed. If the IP is successfully configured, the Managed PoE Switch will apply the new IP address setting immediately. You can access the Web interface of the Managed PoE Switch through the new IP address. 3.3 Storing Current Switch Configuration In the Managed PoE Switch, the running configuration sequence running-config can be saved from the RAM to FLASH by “copy” command, so that the running configuration sequence becomes the start-up configuration file, which is called configuration save.
4. Starting Web Management The following shows how to start up the Web Management of the Managed PoE Switch. Note the Managed PoE Switch is configured through an Ethernet connection. Please make sure the manager PC must be set to the same IP subnet address.
Page 10
The following web screen based on GS-5220-8P2T2X will be the same as that of GS-5220-8UP2T2X. Note 3. After entering the password, the main screen appears as Figure 4-3 shows. Figure 4-3: Web Main Screen of Managed PoE Switch The Switch Menu on the top of the Web page lets you access all the commands and statistics the Managed PoE Switch provides. The Switch Menu always contains one or more buttons, such as “System”, “Switching”, “Routing”...
Page 11
Figure 4-6: Switch Menu – Switching Figure 4-7: Switch Menu -- Routing Figure 4-8: Switch Menu -- QoS...
Page 12
Figure 4-9: Switch Menu -- Maintenance Figure 4-10: Switch Menu -- Security Figure 4-11: Switch Menu -- PoE...
Page 13
Figure 4-12: Switch Menu – Ring Figure 4-13: Switch Menu – ONVIF If you are not familiar with Switch functions or the related param- eter, press “Help icon” anytime on the Web page to get the help description. Note Now, you can use the Web management interface to continue the Switch management or manage the Switch by console interface.
4.2. Saving Configuration To save all applied changes and set the current configuration as a startup configuration on the Web user interface, the startup-configuration file will be loaded automatically across a system reboot. 1. Click the Save icon on the top Switch Menu bar. Figure 4-14: Save Config -- Hot key 2.
10 seconds. After the device is rebooted, you can log in the management Web interface within the same subnet of 192.168.0.xx. L3 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 10G SFP + Managed Switch Ring 10 12 Console Alert 1000 10/100 Reset PoE-in-Use 115200,N,8,1 Figure 5-1: GS-5220-8P2T2X/GS-5220-8UP2T2X Reset Button...
Need help?
Do you have a question about the GS-5220-8UP2T2X and is the answer not in the manual?
Questions and answers