4.5.14 VLAN setting example:
- Separate VLANs
- 802.1Q VLAN Trunk
4.5.14.1 Two separate 802.1Q VLANs
The diagram shows how the Managed Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and
VLAN Group 3 are separated VLANs. Each VLAN isolate network traffic so only members of the VLAN receive traffic from the
same VLAN members. The screen in
Switches.
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario described as follows:
Untagged packet entering VLAN 2
Figure 4-5-20
appears and
Figure 4-5-20 two separate VLAN diagrams
VID
Untagged Members
1
Port-7~Port-8
2
Port-1,Port-2
3
Port-4,Port-5
Table 4-5-2 VLAN and Port Configuration
117
Table 4-5-2
describes the port configuration of the Managed
Tagged Members
User's Manual of GSD-1002M
N/A
Port-3
Port-6