Brother GTX600SB Instruction Manual page 212

(19) From the menu, select the corresponding head under [Maintenance] > [Install Ink after Replacing Head] and press
.
Perform the work operation by following the on-screen instructions.
<TIPS>

After the procedures are completed, the current screen will go back to the standby mode screen.

Replace other print heads in the same way.
(20) Print the nozzle check patterns. ☞"6-1-17. Print out the nozzle check pattern (checking on the print heads)
>>P.220"
(21) Perform the initial settings after head replacement configuration. ☞"3-6-1. Initial settings after head replacement
>>P.61"
(22) In the case of color or OR/GR head replacement, make two-head color adjustments for the replaced head.
☞"3-6-2. Color adjustments between color/ORGR heads >> P.62"
(23) Adjust the ejection timing of the print head. ☞"3-6-3. Firing adjustment >>P.63"
(24) Make position adjustments for the 2 heads of the same color. ☞"3-6-4. 2 same color heads position adjustment
>>P.64"
(25) Perform the platen feed adjustment. ☞"3-6-5. Platen-rolling adjustment >>P.65"
(26) Make white and color/ORGR position adjustments. ☞"3-6-6. White and Color/ORGR Alignment >>P.66"
Precautions to keep good printing quality/use printer over the long term
212