Setting Automatic Multiple Pass Settings - Brother GTX600SB Instruction Manual

Auto Cleaning Start Timing
Specify your desired auto cleaning start timing.
From the menu, select [Printer Setting] > [Auto Cleaning Start Timing], and press
(1)
(2) Select your desired auto cleaning start timing, and press
<TIPS>

Even when [Conduct after Printing] is selected, Auto Cleaning may be performed before printing, depending on the state of use.

7-14. Setting Automatic Multiple Pass Settings

Perform this if the white printing quality deteriorates while printing.
(1) From the menu, select [Printer Setting] > [Auto Multiple Pass Setting], and press
Select the amount of white ink used for multiple pass printing and press
(2)
<TIPS>

The printing quality tends to deteriorate while printing if the temperature is low.

Although automatic multiple pass printing can assure print quality, it may take a longer time for printing.
Auto Cleaning Start Timing
Conduct before Printing
Conduct after Printing
Auto Multiple Pass Setting
Always ON
White Ink 6 cc or More
White Ink 16 cc or More (Standard)
White Ink 26 cc or More
Always OFF
252
.
.
OK
.
.
OK
What to do when needed