4-2. Sending print data using Brother GTX-6 Extra Colors ORGR FileOutput (for Macintosh only)
Saving print data to a file
Check that the "GTX-6 Extra Colors ORGR File Viewer" is running when saving print data to a file using the "Brother
GTX-6 Extra Colors ORGR FileOutput".
The error shown below will occur, and you will not be able to save the data if you output without "GTX-6 Extra Colors
ORGR File Viewer" running.
<TIPS>
Depending on the application, the following error may or may not appear. Try again with the "GTX-6 Extra Colors ORGR File
Viewer" running.
<TIPS>
The procedure for outputting a file from "Brother GTX-6 Extra Colors ORGR FileOutput" is the same as for a Windows PC.
Sending print data
Follow the procedure below to send print data to the printer if the print data has been saved using the "Brother GTX-6
Extra Colors ORGR FileOutput" printer.
<TIPS>
The procedure for sending print data is the same as that for a Windows PC.
(1)
Double-click the file with the extension ".arx6" or ".arx6e" saved using the "Brother GTX-6 Extra Colors ORGR
FileOutput" printer.
(2)
"GTX-6 Extra Colors ORGR File Viewer" will be launched, and the print data will be sent when you click [Send to
Printer].
79
Creating print data