3-6-1. Initial settings after head replacement
Set V-rating after replacing the print head or completing the setup procedure.
(1)
Make sure that the printer and PC are connected via a LAN cable.
(2)
On the PC, from [All Programs] in the Start menu, select "GTX-6 Extra Colors ORGR Maintenance" from "Brother
GTX-6 Extra Colors ORGR Tools".
(3)
After the window shown below appears, select [Initial settings after head replacement] and click [Next].
(4)
Perform the required operation by following the on-screen instructions in the dialog box.
After the adjustment is completed, the currently displayed screen will go back to the window mentioned above.
61
Installation and preparation