Brother GTX600SB Instruction Manual page 306

Error code Error message
[During humidifier water
8200 supply
an error was detected]
[During humidifier water
8201 supply
an error was detected]
[During humidifier water
8202 supply
an error was detected]
8203 [Humidifier drainage error]
[Humi. drain tank not in
8210
position]
8211 [Humidifier drain tank full]
8212 [Humidifier drain tank full]
8220 [Humidification error]
8221 [Machine Error]
In the event that other error codes than those that are mentioned above are displayed, please contact your dealer for
help.
Description
An error has been detected
when water was supplied to
the humidifier unit.
An error has been detected
when water was supplied to
the humidifier unit.
An error has been detected
when water was supplied to
the humidifier unit.
An error has been detected
when draining from the
humidifier unit.
The humidifier drain tank is
not installed.
The humidifier drain tank is
full.
The humidifier drain tank will
be full soon.
An error has been detected
in the humidification fan.
An error has been detected
in the remaining volume
sensor of the water supply
tank of the humidifier unit.
306
Remedy
Make sure the humidifier is supplied with water.
Check and see if the water supply tube is
disconnected, torn, broken, or contaminated
with air.
If the problem persists, please contact your
dealer.
Make sure that the water supply pressure to the
humidifier is not too high.
If the problem persists, please contact your
dealer.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
Make sure that the humidifier drain tank is
installed.
If the problem persists even after reactivating
the printer, please contact your dealer.
Empty the humidifier drain tank.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
Error message