White And Color/Orgr Alignment - Brother GTX600SB Instruction Manual

3-6-6. White and Color/ORGR Alignment

This function is used to align the print position of the white and color heads or the white and OR/GR heads. Adjust
white/color alignment after replacing a print head or completing the setup procedure.
If you want to make adjustments after replacing the print head, configure the initial settings after print head replacement
and adjust the firing timing before you do so.
(1) Prepare a sheet of black paper or a pretreated black or dark color T-shirt.
(2) Make sure that the printer and PC are connected via a LAN cable.
(3) On the PC, from [All Programs] in the Start menu, select "GTX-6 Extra Colors ORGR Maintenance" from "Brother
GTX-6 Extra Colors ORGR Tools".
(4) After the window shown below appears, select [White and Color/ORGR Alignment] and click [Next].
(5) Perform the required operation by following the on-screen instructions in the dialog box.
After the adjustment is completed, the currently displayed screen will go back to the window mentioned above.
66
Installation and preparation