Brother GTX600SB Instruction Manual page 191

<CAUTION>

Set the cap foam by aligning the cap foam hole with the protrusion on the backside of the cap rubber.

Be careful not to reverse the orientation of the cap foam.

The cap chip has two sides. Be careful not to turn it upside down.

Be careful not to turn the cap chip upside down when the cap chip and cap foam are assembled.
Surface
(7) Close the upper left-hand-side cover and top cover.
<NOTE>

Dispose of any waste resulting from the replacement in accordance with applicable laws and ordinances.
Precautions to keep good printing quality/use printer over the long term
Cap chip
Back
191
Cap foam hole
Cap foam