Brother GTX600SB Instruction Manual page 293

Error code Error message
3412 [PC Data Error]
[USB flash drive Access
4100
Error]
[USB flash drive Access
4101
Error]
[USB flash drive Access
4103
Error]
[USB flash drive Access
4104
Error]
[USB flash drive Access
4105
Error]
4106 [Illegal Format]
[USB flash drive Access
4108
Error]
4200 [Machine Error]
Description
Abnormal data has been
received from the PC.
The file in the USB flash
memory is not accessible.
File creation is not possible in
USB flash memory.
The file in the USB flash
memory is not accessible.
The file in the USB flash
memory is not readable.
The file in the USB flash
memory is not writable.
The file in the USB flash
memory is not accessible.
The file in the USB flash
memory is not readable.
An error has been detected
in the display data on the
LCD screen.
293
Remedy
Check on the ARX6E file or ARX6 file by means
of "GTX-6 Extra Colors ORGR File Viewer".
Make sure that your PC is connected to the
printer, and start communication between your
PC and the printer once again.
Restart your PC and the printer.
If the problem persists, please contact your
dealer.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
In the event that this error is displayed after
suspending the updating of firmware, please
start the updating operation over from the
beginning.
If the problem persists, please contact your
dealer.
Error message