3-6-2. Color adjustments between color/ORGR heads
Make adjustments after replacing the print head or completing the setup procedure, or if horizontal stripes appear in the
printing.
If you want to make adjustments after replacing the print head, configure the initial settings after print head replacement
and adjust the firing timing before you do so.
(1)
Make several sheets of A4-size or letter-size white paper available for use.
(2)
Make sure that the printer and PC are connected via a LAN cable.
(3)
On the PC, from [All Programs] in the Start menu, select "GTX-6 Extra Colors ORGR Maintenance" from "Brother
GTX-6 Extra Colors ORGR Tools".
(4)
When the window shown below is displayed, select [Color adjustments between color/ORGR heads] and click
[Next].
(5)
Follow the instructions in the dialog box that appears on the screen.
After the adjustment is completed, the currently displayed screen will go back to the window mentioned above.
62
Installation and preparation