Projector Components - Christie Crimson Series User Manual

Projector components

Identify the main components of the projector.
ID Component
A Projection lens
B Front IR
C Mounting and rigging holes.
D Communication and input
panel
E Service compartment
F Tool box
G Christie TAP
H Keypad interface
I Display panel
J Rear IR
K LED and shutter LED status
indicator
L Air Filter door
M AC Input 2: limited power
N AC Input 1: full power
Crimson Series User Guide
020-102649-07 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
A variety of lenses can be used with the projector. Available lenses are
listed in the Crimson and Mirage Specifications Guide (P/N:
020-102724-XX).
Receives transmissions from the IR remote.
M12 x 1.75 holes for projector feet installation and offer mounting and
rigging points. Four holes located on the top, and four located on the
bottom.
Connects media sources to either the ports on the option cards or the
IMXB.
Access to fold mirror, optical zoom/focus, and digital micromirror device
(DMD) convergence adjustments.
Provides tools for Christie qualified technicians.
Enables Android devices to communicate with the projector using near
field communication.
Controls the projector.
Displays the projector menus and status.
Receives transmissions from the IR remote.
Indicates power status and shutter status.
Provides access to the air filter.
For use in limited power mode.
For use in full power mode.
Introduction
17