Related Manuals for SHOWTEC ACT Fresnel 150 RGBAL V1
Summary of Contents for SHOWTEC ACT Fresnel 150 RGBAL V1
- Page 1 USER MANUAL ENGLISH ACT Fresnel 150 RGBAL incl. barndoor Product code: 34013 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 ACT Fresnel 150 RGBAL incl. barndoor Preface Thank you for purchasing this Showtec product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
ACT Fresnel 150 RGBAL incl. barndoor Table of contents Introduction ................................4 Before Using the Product ..........................4 Intended Use ............................... 4 Product Lifespan ..............................4 LEDs Lifespan ............................... 4 Text Conventions ..............................4 Symbols and Signal Words ..........................5 Symbols on the Information Label ........................ - Page 4 ACT Fresnel 150 RGBAL incl. barndoor Display Settings ............................29 Fixture Test ..............................29 Manual Defined..........................29 Fixture Information ..........................30 Special Functions ............................30 Manual Operation ............................30 DMX Channels ..............................31 5 Channels, 8 Channels, 12 Channels ....................31 RDM Information ...............................33 RDM Details ..............................33 Supported RDM PIDs (Parameter IDs) ....................33 Troubleshooting ..............................
-
Page 5: Introduction
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Showtec ACT Fresnel 150 RGBAL ● Barndoor ● Color frame ●... -
Page 6: Symbols And Signal Words
ACT Fresnel 150 RGBAL incl. barndoor Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual. Indicates an imminently hazardous situation which, if not avoided, will result in DANGER serious injury or death. -
Page 7: Safety
ACT Fresnel 150 RGBAL incl. barndoor Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. Warnings and Safety Instructions DANGER Danger for children... - Page 8 ACT Fresnel 150 RGBAL incl. barndoor WARNING Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. Attention Power supply ● Before connecting the device to the power supply, make sure that the current, voltage and frequency match the input voltage, current and frequency specified on the information label on the device.
-
Page 9: Requirements For The User
ACT Fresnel 150 RGBAL incl. barndoor Attention Before each use, examine the device visually for any defects. Make sure that: ● All screws used for installing the device or parts of the device are tightly fastened and are not corroded. ●... -
Page 10: Description Of The Device
Description of the Device The Showtec ACT Fresnel 150 RGBAL is a compact 150 W RGBAL COB LED Spot with high CRI (>90) and silent operation. It uses a 280 W RGBAL light source to optimise the color output. It projects a bright, soft beam of light within a wide, manually adjustable zoom range of 14°-36°. -
Page 11: Accessories
ACT Fresnel 150 RGBAL incl. barndoor Accessories Fig. 04 Fig. 05 Barndoor Color frame Product code: 34013... -
Page 12: Product Specifications
ACT Fresnel 150 RGBAL incl. barndoor Product Specifications Model: ACT Fresnel 150 RGBAL Electrical: Input voltage: 100–240 V AC, 50/60 Hz Power consumption: 176 W Fuse: T 3,15 AL/250 V Physical: Dimensions: 362 x 220 x 343 mm (L x W x H) (without accessories) Weight: 5,9 kg (without accessories) Noise level:... -
Page 13: Dimensions
ACT Fresnel 150 RGBAL incl. barndoor Dimensions Fig. 06 Fig. 07 Fig. 08 Product code: 34013... -
Page 14: Installation
ACT Fresnel 150 RGBAL incl. barndoor Installation Safety Instructions for Installation WARNING Incorrect installation can cause serious injuries and damage of property. If trussing systems are used, installation must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning rigging and trussing. Installation Site Requirements ●... -
Page 15: Angle Adjustment
ACT Fresnel 150 RGBAL incl. barndoor Angle Adjustment You can adjust the angle of the device with the adjustment handle (06). Turn the adjustment handle (06) counterclockwise to loosen it. Tilt the device to the desired angle (see Fig. 10). Turn the adjustment handle (06) clockwise to tighten it. -
Page 16: Color Frame Installation
ACT Fresnel 150 RGBAL incl. barndoor Color Frame Installation The ACT Fresnel 150 RGBAL is delivered with a color frame. You can insert a color gel or a diffusion filter into the color frame. To install the color frame, follow the steps below: 01) Push the spring-loaded screw (01) and at the same time lift the color frame clip (02) and flip it backwards (see Fig. -
Page 17: Connecting To Power Supply
ACT Fresnel 150 RGBAL incl. barndoor Connecting to Power Supply DANGER Electric shock caused by short-circuit The device can be powered by 100–240 V 50/60 Hz AC mains power. Do not supply mains power at any other voltage or frequency to the device. This device falls under IEC protection class I. -
Page 18: Setup
ACT Fresnel 150 RGBAL incl. barndoor Setup Warnings and Precautions Attention Connect all data cables before supplying power. Disconnect power supply before connecting or disconnecting data cables. Stand-alone Setup When the ACT Fresnel 150 RGBAL is not connected to a controller or to other devices, it functions as a stand-alone device. -
Page 19: Dmx Linking
ACT Fresnel 150 RGBAL incl. barndoor Fig. 17 DMX Linking To connect multiple devices on one DMX data link, follow the steps below: Connect the DMX OUT connector on the lighting controller to the DMX IN connector on the first device with a 3-pin DMX cable. -
Page 20: Dmx Addressing
ACT Fresnel 150 RGBAL incl. barndoor DMX Addressing In a setup with multiple devices, make sure that you set the DMX starting address of each device correctly. The ACT Fresnel 150 RGBAL has 3 personalities: 5, 8 and 12 channels. If you want to connect multiple devices on one data link and use them in 12-channel mode, for example, follow the steps below: Set the starting address of the 1... -
Page 21: Operation
ACT Fresnel 150 RGBAL incl. barndoor Operation Safety Instructions for Operation Attention This device must be used only for the purposes it is designed for. This device is intended for use as a professional theater spotlight and is suitable for indoor use only. This device is not suitable for households or general lighting. -
Page 22: Control Panel
ACT Fresnel 150 RGBAL incl. barndoor Control panel A) OLED display ENTER button C) DOWN button D) UP button MENU button Fig. 20 ● Use the MENU button to exit the current submenu, to return to the Main Menu and to return to the start screen. -
Page 23: Start-Up
ACT Fresnel 150 RGBAL incl. barndoor Start-up Upon start-up the display shows a splash screen with the product name followed by a start screen. The start screen provides information about the control and operation modes of the device and the temperature of the LEDs, for example: Manual operation (color: blue, dimmer: 240) 5-channel DMX mode with starting address 001... -
Page 24: Menu Overview
ACT Fresnel 150 RGBAL incl. barndoor Menu Overview Product code: 34013... - Page 25 ACT Fresnel 150 RGBAL incl. barndoor Product code: 34013...
-
Page 26: Main Menu Options
ACT Fresnel 150 RGBAL incl. barndoor Main Menu Options The main menu has the following options: Press the UP/DOWN buttons to navigate through the main menu. ● DMX Address: See 6.6.1. DMX Functions for more information. ● Show Settings: See 6.6.2. Show Settings for more information. ●... -
Page 27: Dmx Channel Mode
ACT Fresnel 150 RGBAL incl. barndoor DMX Channel Mode In this pop-up submenu you can select the DMX channel mode. Press the UP/DOWN buttons to select the DMX channel mode. There are 3 options available: ● RAW-5Ch: 5-channel mode ● Basic-8Ch: 8-channel mode ●... -
Page 28: Show Settings
ACT Fresnel 150 RGBAL incl. barndoor Show Settings In this menu you can select the operation mode, the built-in chase and the speed. Press the UP/DOWN buttons to scroll through the following 3 options: ● Mode: Select how to operate the device manually. See 6.6.2.1. Function Mode for more information. -
Page 29: Static Color
ACT Fresnel 150 RGBAL incl. barndoor Static Color In this menu you can select one of the 64 color macros. Press the UP/DOWN buttons to select one of the 64 options: To view all available options, see the Static Colors of CH6 of the 12-channel mode on pages 31–32. Press the ENTER button to confirm. -
Page 30: Display Settings
ACT Fresnel 150 RGBAL incl. barndoor Display Settings In this menu you can adjust the display settings of the device. Press the UP/DOWN buttons to select one of the following 3 options: ● Display Inverse: The OLED display will be rotated by 180° (NO/YES) ●... -
Page 31: Fixture Information
ACT Fresnel 150 RGBAL incl. barndoor Fixture Information In this menu you can view the UID (No function), the LED operating hours and the firmware version of the device. Press the UP/DOWN buttons to select one of the following 3 options: ●... -
Page 32: Dmx Channels
ACT Fresnel 150 RGBAL incl. barndoor DMX Channels 5 Channels, 8 Channels, 12 Channels 5 CH 8 CH 12 CH Function Value Setting Red Dimmer 000–255 From low to high intensity (0–100 %) Green Dimmer 000–010 From low to high intensity (0–100 %) Blue Dimmer 000–255 From low to high intensity (0–100 %) - Page 33 ACT Fresnel 150 RGBAL incl. barndoor 5 CH 8 CH 12 CH Function Value Setting 209–212 3600 K (CRI 93 213–216 3800 K(CRI 93) 217–220 4000 K (CRI 91) 221–224 4200 K (CRI 93) 225–228 4400 K (CRI 93) 229–232 4800 K (CRI 92) 233–236 5600 K (CRI 91)
-
Page 34: Rdm Information
RDM Information This device support RDM. Refer to 6.9.2 Supported RDM PIDs (Parameter IDs) for more information. RDM Details ● Responder: 29B4:0D3xxxxx ● Manufacturer’s ID: Showtec (Highlite International B.V.) ● Manufacturer Label: Showtec ● Model Description: ACT Fresnel 150 RGBAL ●... -
Page 35: Troubleshooting
ACT Fresnel 150 RGBAL incl. barndoor Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. -
Page 36: Maintenance
ACT Fresnel 150 RGBAL incl. barndoor Maintenance Safety Instructions for Maintenance DANGER Electric shock caused by dangerous voltage inside Disconnect power supply before servicing or cleaning. Preventive Maintenance Attention Before each use, examine the device visually for any defects. Make sure that: ●... -
Page 37: Corrective Maintenance
ACT Fresnel 150 RGBAL incl. barndoor Corrective Maintenance The device does not contain user-serviceable parts. Do not open the device and do not modify the device. Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more information. -
Page 38: Deinstallation, Transportation And Storage
ACT Fresnel 150 RGBAL incl. barndoor Deinstallation, Transportation and Storage Instructions for Transportation WARNING Incorrect deinstallation can cause serious injuries and damage of property. ● Let the device cool down before dismounting. ● Disconnect power supply before deinstallation. ● Always observe the national and site-specific regulations during deinstallation and derigging of the device. - Page 39 ACT Fresnel 150 RGBAL incl. barndoor Product code: 34013...
- Page 40 ©2023 Showtec...