Up to 65,536 events can be stored in the device's memory.
If the device's memory is full and further saving of events is
impossible, when the device is turned on, an information
window will appear, which will notify about memory overflow
(Figure 21). To read events and delete them from the device's
memory, you need to use the "Spectra Reader" software.
Figure 21 – An informational screen that notifies about
2.3.3.7.9 Time and Date
The "Time and date" item contains the following settings
(Figure 22):
Figure 22 – Time and date parameters setup
• Time – allows you to set the current time;
• Date – allows you to set the current date;
• GPS sync. – allows synchronization of time and date
with the navigation receiver;
• Time zone – allows you to set the time zone that will be
used when synchronizing with the navigation receiver.
Time zone values can be set in the range from -12:00 to +12:00
in 15-minute increments.
memory overflow
35